802.3af 802.3at Compatible poe injector
Input:100-240VAC
Output: DC48V - 15.4W
support net : 100M and 1000M
802.3af 802.3at PoE Compatible Power Over Ethernet POE splitter PoE adapter POE injector
Power Over Ethernet PoE Injector works with any and all access points that are also 802.3af or 802.3at PoE Compatible.
Introduction
Input Rated Voltage : |
90VAC~250VAC |
Input Frequency Range: |
47Hz~63Hz |
Efficiency : |
85%(MIN)at Rated Voltage |
Output: |
DC 48V - 15.4W |
Output power : |
MAX 70W |
Ripple and Noise : |
<120Mv at full road with 20MHz bandwidth |
Turn On Delay Time: |
<3S (AC:110V and full load) |
Safety protection : |
over voltage and current protection for poe injector |
Leakage Current: |
<5mA |
Operating Temperature: |
0°C----+40°C |
Storage Temperature: |
-20°C----+85°C |
Certificate: |
CE FCC ROHS etc |
Safety Standard : |
EN60950-1 UL60950-1 ESD (EN61000 3-3) |
Data connector |
RJ45 +Power pins1&2(+), Power Return pins 3&6 (-) |
Futures: |
Compliant with Isolation and Channel |
Application: |
IP Telephones, Wireless Network Access Points, Blue Tooth Access Point IP Print Servers, Security Camera etc… |
The PoE Injector (PoE adapter) can save you money by using an existing Ethernet line to deliver data and power.
The PoE Injector (PoE adapter) can easily connect any IEEE 802.3af-compliant device to a non-PoE LAN switch port. This PoE Injector can be used to connect a wireless access point, IP phone, network camera, or any IEEE 802.3af powered device to a LAN switch.
Reduce Wiring Costs
With the PoE Injector (PoE adapter) you can dramatically reduce wiring costs by powering devices through your existing Ethernet line rather than running new AC power lines. To use this product all you need to do is connect the PoE Injector to the LAN switch port, and then use your existing Ethernet Cable to deliver DC power and data to your device.
Protect Your Equipment
Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that your devices are protected from power problems The PoE Injector is equipped with short circuit protection keeping your devices safe
Feature/standard | 802.3af (802.3at type 1 ) | 802.3at type 2 (POE+) |
Output power of power supply [W] | 15.40 | 30.00* |
Minimum power available for the powered device [W] | 12.95 | 25.5* |
Output voltage of power supply [V] | 44...57 | 50...57 |
Supplying voltage available at the powered device [V] | 37...57 | 42.5...57 |
Max current [mA] | 350 | 600 |
Ethernet compatibility | 10BASE-T, 100BASE-TX and 1000BASE-T |
10BASE-T, 100BASE-TX and 1000BASE-T |
Range [m] | 100 | 100 |
Cabling | UTP/FTP min. cat. 3 | UTP/FTP min. cat. 5 |